Draytek Vigor2926L User Manual page 739

IP1-IP2
num
p2pnum
E x a m p l
E x a m p
>ip session default 100
> ip session add 192.168.1.5-192.168.1.100 100 50
> ip session on
> ip session status
IP range:
192.168.1.5 - 192.168.1.100 : 100
Current ip session limit is turn on
Current default session number is 100
T e l n e t C o m m
T e l n e t C o m m
This command allows users to set maximum bandwidth limit number for the specified IP.
S S y y n n t t a a x x
ip bandwidth on
ip bandwidth off
ip bandwidth default [tx_rate][rx_rate]
ip bandwidth status
ip bandwidth show
ip bandwidth [add/del] [IP1-IP2][tx][rx][shared]
S y n t a x
S y n t a x
Parameter
on
off
default [tx_rate][rx_rate]
status
show
add
del
IP1-IP2
tx
rx
shared
E x a m p l
E x a m p
Vigor2926 Series User's Guide
It means the range of IP address specified for this command.
It means the number of the session limits, e.g., 100.
It means the number of the session limits, e.g., 50 for P2P.
e
l e
a n d : i p b a n d w i d t
a n d : i p b a n d w i d t
D e s c r i p t i o n
D e s c r i p t i o n
e
l e
h
h
Description
It means to turn on the IP bandwidth limit.
It means to turn off the IP bandwidth limit.
It means to set default tx and rx rate of bandwidth limit. The
range is from 0 – 65535 Kpbs.
It means to display the current settings.
It means to display all the bandwidth limits settings within the IP
range.
It means to add the bandwidth within the IP range.
It means to delete the bandwidth within the IP range.
It means the range of IP address specified for this command.
It means to set transmission rate for bandwidth limit.
It means to set receiving rate for bandwidth limit.
It means that the bandwidth will be shared for the IP range.
723