Draytek Vigor2926L User Manual page 769

-m [value]
-d [value]
-v [value]
-i [value]
-j [value]
-l [value]
-w [value]
-p [value]
-q [value]
-e [value]
set
[index]
-e [value]
-w [value]
-y [value]
Vigor2926 Series User's Guide
line.
It means to set ICMP, UDP or TCP as flowtest mode.
Value – 1, 2 or 3. In which,
1: ICMP
2: UDP
3: TCP
It means to set the original direction
Value – 1 or 2. In which,
1: LAN to WAN
2: WAN to LAN
It means to choose IP version.
Value – 4 or 6. In which,
4: IPv4
6: IPv6
It means to specify IPv4 address of LAN device (e.g.,
192.168.1.10).
It means to specify IPv4 address of WAN divice (e.g.,
8.8.8.8).
It means to specify IPv6 address of LAN device (e.g.,
2001:5678:0000:0000:1319:8a2e:0370:7343).
It means to specify IPv6 address of WAN divice (e.g.,
2001:1234:0000:0000:1319:8a2e:0370:7344).
It means to set port number of LAN device (e.g., 65535)
It means to set port number of WAN device (e.g., 53).
It means to set MAC address of LAN device (e.g.,
AA:BB:CC:11:22:33).
Index: 1 to 5.
It means to enable /disable the test packet.
Value – 1 or 0. In which,
1: enable
0: disable
It means to set direction of this packet.
Value – 1 or 2. In which,
1: LAN to WAN
2: WAN to LAN
It means to set the payload type of this packet.
Value – 1 to 7. In which,
1: Customize
2: Echo Request
3: Echo Reply
4: Destination Unreachable
5: Ping Request
6: Pin Reply
7: Traceroute
8: DNS Query
753