Draytek Vigor2926L User Manual page 874

-N [name]
-n [number]
-a [id]
-A [enable]
-p [passwd]
-e [sec]
-w [enable]
-m [mode]
-F [mode]
-u [url]
-t [sec]
-g [port]
-z [pattern]
-i [enable]
-B <enable>
-S [idx]
-k [num1 num2...]
-v
Voip sip calllog
voip sip ep
n
-o [acc]
-L [url]
858
0 – disable
1 - enable
Set SIP account display name.
Name - max. 23 characters.
Set SIP account number.
Number - max. 63 characters.
Set SIP authentication ID.
Id - max. 63 characters.
Enable /disable to use SIP authentication ID.
0 – disable
1 - enable
Set SIP account password (max. 63 characters).
Set expiry time (default 3600) for SIP account.
Enable to make phone call without registering.
Set NAT traversal mode.
0 – disable
1 – stun
2 – manual
3 - nortel
Set call forwarding mode.
0 – disable
1 – always
2 – busy
3 - no answer
4 - busy or no answer
Set SIP URL for call forwarding (max. 63 characters).
Set call forwarding timer. For example,
voip sip acc 1 –t 30
Set the ring port for incoming call. For example,
Port - r1 means FXS1; r2 means FXS2.
Set account ring pattern (1 ~ 6).
Remove all bindings while they are un-registered. 0 means Disable;
and 1 means Enable.
Enable / disable the function of Broadsoft Call Control.
0 – disable
1 - enable
Enable and use alias IP to register.
idx - 1 to 31. If 0 is used, such function will be disabled.
Set backup wan list (first wan, second wan...).
range: 1 to 4.
View current status for account settings.
Display current status for SIP call log.
The index number of the VoIP settings.
n – 1, 2.
Available dial out account (1 ~ 12).
Set SIP URL (max. 63 characters) for hot line.
Vigor2926 Series User's Guide