Draytek Vigor2926L User Manual page 445

Administrator LDAP
Setting
When you click OK, the login window will appear. Please use the new password to access into
the web user interface again.
Vigor2926 Series User's Guide
User Name – Give a user name for the local user.
Password – Type the password for the local user.
Confirm Password – Type the password again for
confirmation.
Add – After typing the user name and password above, simply
click it to create a new local user. The new one will be shown
on the Local User List immediately.
Edit – If the username listed on the box above is not
satisfied, simply click the username and modify it on the
field of User Name. Later, click Edit to update the
information.
Delete – If the local user listed on the box above is not
satisfied, simply click the username and click Delete to
remove it.
Enable 'admin' account login to Web UI from the Internet
an ensure any user accessing into web user interface of Vigor
router through Internet by username/password of
"admin/admin".
Enable LDAP/AD login for admin users – If it is enabled, any
user can access into the web user interface of Vigor router
through the LDAP server authentication.
Enable 'admin' account login to Web UI from the Internet –
The default setting is enabled. It can ensure any user
accessing into web user interface of Vigor router through
Internet by username/password of "admin/admin".
LDAP Server Profiles – Available profiles will be displayed
here under the link of LDAP Profile Setup.
LDAP Profile Setup – It allows you to create a new LDAP
profile.
429