Draytek Vigor2926L User Manual page 367

Item
Enable
Group Name
Authentication Methods
After finishing all the settings here, please click OK to save the configuration.
Vigor2926 Series User's Guide
Description
Check this box to enable such profile.
Type a name for such profile. The length of the name is
limited to 23 characters.
It can determine the authentication method used for such
profile.
Local User DataBase – The system will do the authentication
by using the user defined account profiles (in VPN and Remote
Access>>Remote Dial-In User). The enabled profiles will be
listed in the Available User Account on the left box. To add a
profile into a group, simply choose the one from the left box
and click the >> button. It will be displayed in the Selected
User Account on the right box. For detailed information about
configuring the profile setting, refer to Objects Setting>>IP
Group.
RADIUS – The RADIUS server will do the authentication by using
the username and password
TACACS+ - The TACACS+ will do the authentication by using
the username and password.
LDAP / Active Directory - If it is checked, the LDAP / AD
server will do the authentication by using the username,
password, information stated on the selected profiles.
If the above three options are enabled, the system will do the
authentication based on them in sequence.
351