Feed Adjuster Assembly Attachment - Brother NX600 Service Manual

Modules
6

Feed adjuster assembly attachment

1. Attach the feed adjuster assy. 1, polyester slider 2 and
bushing supporter assy. 3.
*Key point
• Attach S14 to the feed adjuster assy. 2 starting with the side
having the smaller spring diameter.
2. Attach the bushing supporter assy. 3 and feed adjuster assy. 2 to the feed
base 4 using the screws 1 (two).
Lubricate the feed adjuster assembly shaft with turbine
oil #100
Apply Epnoc Grease AP to the entire operating part of
the feed adjuster feed regulator slide block.
Start movie clip (CD-ROM version only)
1
S14
8.8
7
Stopper plate block assy. attachment
1. Attach the stopper plate block assy. 1 using the screw 1.
Start movie clip (CD-ROM version only)
1
Feed module
Small amount
Screw, Bind
M4X6
1.18 – 1.57 N·m
Color; Silver
9.9
5.5
Screw, Bind
M4X5
1.18 – 1.57 N·m
Color; Silver
1
to the
S14
1 – 2 drops
Torque
SPRING
XC2531***
Torque
2 3
S14
3 4
1
1
1
3 - 63