Drop Assy. Removal - Brother NX600 Service Manual

Modules
21

Drop assy. removal

1. Remove the screws 1 (two), and remove the drop assy. 1.
22
Drop assy. disassembly
1. Remove the screw 1.
2. Remove retaining ring E3, and remove the vertical feed shaft 1, polyester
slider, set screw collar 4 2 and
3. Remove retaining ring E3 from the vertical feed shaft 1.
Start movie clip (CD-ROM version only)
23
Drop knob removal
1. Remove the screws 1, and remove the spring plate 1.
2. Remove retaining rings E2 (two), and remove slide shafts B 2 (two) and
the drop knob 3.
3. Remove retaining rings E2 (two) from the slide shafts B 2 (two).
Feed and bobbin module
.
S18
1
1
Retaining
1
ring E3
2 1
Retaining
ring E3
Retaining ring E2 2 Retaining ring E2
3 1
S18
1
2 - 51