Brother NX600 Service Manual page 113

Main unit
9
Front cover assembly
(assembling the operation PCB holder)
1. Attach the rubber keys 1 to the operation PCB holder 2.
2. Attach the operation F3 PCB assy. 3 using the screws 1 (four).
3. Attach the flat cable 4 from the LCD panel to CN1 on the operation F3
PCB assy., and secure it by sliding the stoppers 5 on both sides of CN1
downward.
4. Connect the LCD panel connector to CN3 6 on the operation F3 PCB
assy.
1
10
Front cover assembly
(attaching the operation PCB holder)
1. Attach the operation PCB holder 1 to the front cover using the screws 1
(four).
2. Attach the SS-VR F PCB assy. connector 2 to the operation F3 PCB assy.
*Key point
• Press down the indication plate hooks (four).
3. Attach the indication plate 3.
1
Main parts
Taptite, Bind B
M3X8
0.57 – 0.78 N·m
Color; Gold
Taptite, Bind B
M3X8
0.57 – 0.78 N·m
Color; Gold
1
6
Torque
3
1
3
Torque
2
4
1
1 5
1
1 2
3 - 37