Basic of Assembly
2
Attachment of Feed connecting lever assy
1. Insert the boss of feed connecting lever into the positioning hole of feed regulator plate B, and turn it 90
degrees. And attach the feed adjusting shaft holder of feed connecting lever assy to the arm bed with
the two screws (taptite, bind S M4X10).
2. Attach the spring extension C (XE9262) to the feed connecting lever and the pattern selecting unit
assy.
Taptite, Bind S M4X10
Spring extension C (XE9262)
Feed unit / Feed control
Pattern selecting unit assy
Feed connecting lever assy
2 - 36
Positioning hole
Feed regulator plate B
Spring
extension C
(XE9262)
Boss
Feed connecting lever
Feed adjusting shaft holder
Taptite, bind S M4X10