Brother NX600 Service Manual page 24

Main unit
4
Front thread guard cover removal.
1. Remove the screw 1, and remove the front thread guard cover 1.
Start movie clip (CD-ROM version only)
5
Needle plate B removal and disassembly
1. Remove the needle plate cover 1.
2. Remove needle plate B 2.
3. Remove the cutter cover 3.
4. Remove the spring plate 4 from the cutter cover 3, and remove the NT
lower thread cutter.
5. Undo the slide button hook (two locations), and remove the slide button
5.
Start movie clip (CD-ROM version only)
2 - 4
Main parts
1 1
1
3
4
2
5