Feed Arm Assembly Attachment - Brother NX600 Service Manual

Modules
9

Feed arm assembly attachment

1. Attach retaining ring E5 to the horizontal feed shaft 1.
2. Align the feed arm B assy. feed regulator slide block shaft 2 with the feed
adjuster assembly hole 3.
3. Align the feed arm assy. 5 with the feed base 4, and attach the horizontal
feed shaft assembly 1 and polyester slider 6.
4. Install the screw 1.
5. Apply 1 – 2 drops of Sewing Lube to the horizontal feed shaft 1.
Lubricate the three operating areas of the horizontal
feed shaft with Sewing Lube
Start movie clip (CD-ROM version only)
1
Feed module
1 – 2 drops each
Set Screw, Socket (CP)
M4X4
1.18 – 1.57 N·m
Color; Black
*Bottom
1
view
Torque
1
Retaining
1
ring E5
3
2
6 5 4
3 - 65