Front Cover Assembly (Spool Pin Attachment) - Brother NX600 Service Manual

Main unit
6

Front cover assembly (spool pin attachment)

1. Attach the spool pin 1 to the spool pin holder assembly 2.
2. Attach the spool pin holder assembly 2 using the screw 1.
3. Attach the thread bobbin cover 3 using the screws 2 (two).
Start movie clip (CD-ROM version only)
1
2
7
Front cover assembly (assembling bobbin winder guide
assembly)
1. Attach the bobbin winder guide assembly 1 to the front cover.
2. Hand start the screw 1.
(Fully tighten after 4 - 18 "Bobbin winder adjustment.")
Start movie clip (CD-ROM version only)
1
8
LCD panel attachment
1. Attach the LCD panel 1 and the board pressers (two) to the operation
PCB holder using the screws 1 (two).
1
3 - 36
Main parts
Taptite, Cup B
M3X10
Color; Gold
Taptite, Bind B
M3X8
Color; Gold
Screw, Pan (S/P washer)
M3X8DA
Color; Gold
Taptite, Bind B
M3X10
Color; Gold
Torque
0.57 – 0.78 N·m
Torque
0.57 – 0.78 N·m
Torque
0.57 – 0.78 N·m
Torque
0.57 – 0.78 N·m
1
2
1 2
3
1
1
1
1
2