Brother NX600 Service Manual page 27

Main unit
11
Front cover disassembly (spool pin removal)
1. Remove the screws 1 (two), and remove the thread bobbin cover 1.
2. Remove the screw 2, and remove the spool pin holder assy. 2 and the
spool pin 3.
Start movie clip (CD-ROM version only)
12
Front cover disassembly (SS-VR F PCB assy. removal)
1. Remove the screw 1, and remove LED lamp holder R supporter 1.
2. Remove the screws 2 (four), and remove the insulation sheet 2 and the
SS-VR F PCB assy. 3.
3. Undo the PCB unit LED lamp FR connector.
4. Remove the reverse button 4, SS-button 5 and thread cut button 6.
Start movie clip (CD-ROM version only)
Main parts
1
1
3
2
2
2 2
3 1 1
4
6 5
2 - 7