Lever Ab Assy. Disassembly - Brother NX600 Service Manual

Modules
19

Lever AB assy. disassembly

1. Remove retaining ring E3, and remove lever B 2 and
A assy. 1.
2. Remove the cap 3 from lever B 2.
20
Shaft bushing A removal
1. Remove the screw 1, and detach shaft bushing A 1.
21
Thread guide plate removal
1. Remove thread guide pate 1.
22
Thread take-up assy. disassembly
1. Remove the screw 1, and detach the thread take-up lever assy. 1.
NOTE •The screw 1 is reverse threaded.
2. Remove the screws 2 (two), and detach the needle bar crank rod assy. 2.
Start movie clip (CD-ROM version only)
Needle-presser module
S08
Retaining
ring E3
from the lever
S08
1
1
1 2
1
1
1
1 2
2
2 - 39