Main unit
13
Tension disk removal
1. Remove the screw 1, and remove initial adjustment plate 1.
2. Remove the rubber from the initial adjustment plate 1.
3. Loosen the thread tension adjusting screw 2, and remove the tension plate
assy. 3.
4. Remove the thread tension adjusting screw 2,
disc washer 6, tension release plate assy. A 7, washer 5, tension disk B
8 and tension disk A 9.
Start movie clip (CD-ROM version only)
14
Thread take up spring removal
1. Remove the screw 1, and remove the thread catching spring case 1.
2. Remove the
from the thread catching spring case 1.
S11
Start movie clip (CD-ROM version only)
15
Thread guide wire removal
1. Remove the screw 1, and remove the thread guide wire 1 and washer 2.
Start movie clip (CD-ROM version only)
Thread tension mechanism
, washer 5, tension
S05
7
6
2
5
9
8
S05
1
1
1
1
S11
2
1
1
2 - 21
3
$