Adjusting The Reverse Feed Assembly - Brother LZ2-B855E Service Manual

6. ADJUSTMENTS
6-21. Adjusting the reverse feed assembly (B855E/BT856E)
1045S
1123S
If the feed amount is at the maximum, press the backtack lever q to its lowest position so that the plunger cushion
e touches the base of the backtack solenoid w.
Set the condense stitch adjustment dial t to the maximum reverse setting when adjusting.
Loosen the two screws r and move the backtack solenoid w up and down to adjust.
6-17
q
t
LZ2-B855E,B856E
w
r
e
r
1046S