Feed Arm Assy. Removal - Brother NX600 Service Manual

Modules
15

Feed arm assy. removal

1. Remove the screw 1, and remove the horizontal feed shaft 1 and the
polyester slider.
2. Remove the feed arm assy.
3. Remove retaining ring E5 from the horizontal feed shaft 1.
Start movie clip (CD-ROM version only)
16
Feed arm assy. disassembly
1. Remove the retaining ring E3, and remove feed arm B assy. 1 and the
polyester slider.
2. Remove the retaining ring E2, and remove the feed supporting plate assy.
2 from the feed arm B assy 1.
Start movie clip (CD-ROM version only)
17
Stopper plate block assy. removal
1. Remove the screw 1, and remove the stopper plate block assy. 1.
Feed and bobbin module
*Bottom view
1 1
Retaining ring E5
1
Retaining ring E3
1
2 Retaining ring E2
1
1
*Bottom
view
2 - 49