Thread Take Up Spring Attachment - Brother NX600 Service Manual

Main unit
3

Thread take up spring attachment

1. Attach the to the thread catching spring case 1.
S11
*Key point
• Insert the end 2 of
(second from bottom).
• Insert the bent side of
thread catching spring case 4 (two locations).
2. Attach the thread catching spring case 1 to the thread guard assembly 6
using the screw 1
*Key point
• Align the protrusions 5 (two) on the bottom of the thread
catching spring case 1 with the oval hole in the thread guard
assembly 4, and turn clockwise to the end of the hole to
attach.
Start movie clip (CD-ROM version only)
1
S11
7.4
3 - 18
Thread tension mechanism
S11 into spring tensile position hole
3 between the protrusions on the
S11
Screw, Pan (S/P washer)
M3X18DA
Color; Silver
15.6
6
Torque
0.78 – 1.18 N·m
THREAD TAKE UP SPRING
XZ0145***
S11
1
2
3
4
5
1