Brother NX600 Service Manual page 33

Main unit
12
Main motor assembly disassembly
1. Remove the screws 1 (two), and remove the main motor assembly 1 and
the motor spacer presser 2.
2. Remove the fender rubber 3 from the motor holder 4.
3. Remove the spacer 4x6(two) from the fender rubber 3.
13
Side feed mechanism removal
1. Remove screws 1 (two) and screws 2 (two), and remove the side feed
unit and wire clip.
Electrical parts and motors
1 1
2
4
3
2
1
2 - 13