Needle-Presser Module Removal - Brother NX600 Service Manual

Main unit
5

Needle-presser module removal

1. Remove the screw 1.
2. Remove the screws 2 (four), and detach presser plate A 1 and presser
plate B 2.
3. Remove the needle-presser module 3.
4. Detach the shaft 4 from the needle-presser module 3.
Start movie clip (CD-ROM version only)
6
Wire assy. removal
1. Remove retaining ring E3.
2. Remove retaining ring E4, and remove the wire assy. 1.
Needle bar, presser mechanism / Upper shaft mechanism
*Rear view
1
1 2
3
4
Retaining ring E4
1
Retaining ring E3
2
2 - 31