Presser Dial Attachment - Brother NX600 Service Manual

Modules
30

Presser dial attachment

1. Attach the presser dial shaft assy. 1 to the presser dial 2, and attach
retaining ring E4.
*Key point
• See the figure to the right for the presser dial shaft assy. 1 D
cut 3 and presser dial 2 hole 3.
2. Attach the presser dial gear 4.
*Key point
• Align the presser dial gear 4 match mark 5 and the first
indentation 7 from the top in the tension spring receiving gear
6 .
3. Attach the presser dial assy.
*Key point
• Align the presser dial shaft assy. 1 D cut 3 and the presser
dial gear 4 D cut.
4. Attach the spring plate 8 to the upper unit holder using the screw 1.
1
Needle-presser module
Taptite, Bind B
M3X8
0.78 – 1.18 N·m
Color; Gold
3
6
8
Torque
2 1
7 5
4
4
Retaining ring E4
1
3 - 57