Brother NX600 Service Manual page 32

Main unit
8
Inlet assy removal
1. Remove the screw the screw 1, and remove the inlet assy. 1.
2. Remove base rubber A (four).
3. Remove the regulator adjusting screw assy. 2.
9
Timing belt (motor belt) removal
1. Remove timing belt 1.
Start movie clip (CD-ROM version only)
10
Motor fan removal
1. Remove motor fan 1.
NOTE •Be careful not to bend the fins of the motor fan 1.
Start movie clip (CD-ROM version only)
11
Main motor assembly removal
1. Remove the screws 1 (two), and remove the main motor assembly 1.
Start movie clip (CD-ROM version only)
2 - 12
Electrical parts and motors
1
2
1
1
1
1
1