One-Point Pattern Adjustment - Brother NX600 Service Manual

Adjustment (Main Unit)
1. Start test mode (refer to 4.4 "Test Mode" for test mode startup methods).
2. After pressing and selecting
F feed correction value
3. Set up two pieces of broadcloth, one on top of the other, on the sewing machine, press
"PATTERN ADJUSTMENT" and check the shape of the one-touch pattern.
4. If there is doubling, gaps or slippage in the one-touch pattern, select "F feed correction value" or "S feed
correction value" using

One-point pattern adjustment

, press , and select "PATTERN ADJUSTMENT."
Fig.A
Make a positive
F correction
Make a positive
S correction
or , and adjust using
S feed correction value
Make a negative
F correction
Make a negative
S correction
or .
to work with
4 - 23