Brother NX600 Service Manual page 31

Main unit
4
PCB Unit LED lamp FL removal
1. Disconnect the bands on the back of the arm bed (3 locations).
2. Remove the screw 1, and remove PCB unit LED lamp FL 1.
Start movie clip (CD-ROM version only)
5
Base plate sub assy. removal
1. Remove the screws 1 (three), and remove the base plate sub assy. 1.
Start movie clip (CD-ROM version only)
6
Knee lifter assy. removal
1. Remove the screws 1 (five), and remove the knee lifter assy. 1.
7
Base plate cover removal.
1. Remove the screws 1 (four), and remove the base plate cover 1.
Electrical parts and motors
1
1
1 1
1 1
1
1
1 1
2 - 11