Electrical Parts And Motors; Np Pcb Assy. Attachment - Brother NX600 Service Manual

Main unit
1

NP PCB assy. attachment

1. Attach the PCB holder 1 to the arm bed using the screws 1 (three).
2. Attach NP PCB assy. 2 and the insulation sheet 3 to the PCB holder 1
using the screws 2 (two).
Start movie clip (CD-ROM version only)
1
2
2
Main PCB assy. attachment
1. Attach the main PCB assy. 1 to the PCB holder and arm bed using the
screws 1 (two) and the screw 2.
*Key point
• Fully tighten the screw 1 in the PCB assy. holder holes (four)
in the two locations on the right side.
Start movie clip (CD-ROM version only)
1
2

Electrical parts and motors

Taptite, Bind B
M3X8
0.59 – 1.78 N·m
Color; Gold
Screw, Bind
M4X8
0.78 – 1.18 N·m
Color; Silver
Taptite, Bind B
M3X8
0.59 – 1.78 N·m
Color; Gold
Screw, Bind
M4X8
0.78 – 1.18 N·m
Color; Silver
Torque
Torque
1
1
Torque
Torque
2, 3 2
1
Holder holes
1 2
3 - 25