Feed Final Assembly Attachment - Brother PR655 Service Manual

Main unit
18

Feed final assembly attachment

1. Attach the 2 Y-guide shafts 1 to the feed final assembly 5, and then
attach the feed final assembly 5 to the base frame.
2. Secure the 2 fixed Y-shaft plates 6 with the 4 screws 1 (one each on left
and right).
3. Pull the feed final assembly toward you.
4. Connect the FFC (SML2CD-Y) 7 connected to the feed final assembly's
connect PCB to the Y-area sensor assembly 2, and lock the connector.
5. Attach the sheet 3, FFC (SML2CD-Y) 7, and sheet B 4 to the base
frame with the screw 2.
1
2
Feed unit
Taptite, Bind S
1.47 — 1.96 N-m
M4X10
Screw, Bind
1.18 — 1.57 N-m
M4X6
3 - 89
6
1
4
Torque
Torque
2
5 6
1 1
3
7 2