Brother NX600 Service Manual page 34

Main unit
14
Side feed mechanism disassembly
1. Remove screw 1 and screw 2, and remove plate spring B 1, the side
feed adjust plate 2, washer, side feed arm assy. 3 and plate spring A 4.
2. Remove the rubber.
3. Remove screw 3, and remove the S stopper 5.
4. Remove retaining ring E3, and remove the side feed plate 6 and side feed
spacer 7.
5. Remove , and remove the side feed gear 8.
S41
6. Remove screws 4 (two), and remove the S pulse motor 9.
2 - 14
Electrical parts and motors
1 3
2 1
5
3
Retaining ring E3
S41
7 6
9
4
2
4
8