Thread Tension Gear Attachment - Brother NX600 Service Manual

Main unit
6

Thread tension gear attachment

1. Attach the thread tension gear 1, spring 2 and thread tension gear cover
3 and attach retaining washer E3.
*Key point
• Attach the spring 2 to the small holes 4 in the thread tension
gear 1 and thread tension gear cover 3.
• Turn the thread tension gear cover 3 clockwise until the large
holes 5 in the thread tension gear 1 and thread tension gear
cover 3 are on top of each other, and attach the thread
tension gear assembly.
7
Plate assembly attachment
1. Attach the plate assembly 1 using the screw 1.
Start movie clip (CD-ROM version only)
1
8
Thread guide attachment
1. Attach the thread guide 1 using the screws 1 (two).
Start movie clip (CD-ROM version only)
1
3 - 20
Thread tension mechanism
Screw, Bind
M3X4
Color; Silver
Screw, Bind
M3X4
Color; Silver
1
Torque
0.78 – 1.18 N·m
Torque
0.78 – 1.18 N·m
2
4
5 Retaining ring E3
1
1
1
1
3