Modules
1
Shaft bushing assembly attachment
1. Using the screws 1 (two), attach the shaft bushing assembly 1 to the
upper unit holder.
Start movie clip (CD-ROM version only)
1
2
Thread take-up lever link assembly
1. Attach the shaft 1,
holder, and attach retaining ring E4.
2. Install the screw 1 in the shaft 1.
Apply Molykote EM 30L grease all the way around
the shaft hole in the thread take-up lever link.
Start movie clip (CD-ROM version only)
S06
3 - 42
Needle-presser module
Screw, Pan (S/P washer)
M4X14DB
Color; Silver
and thread take-up lever link 2 to the upper unit
S06
20.7
5.2
Torque
1.18 – 1.57 N·m
small amount
SPRING
XC2441***
1
1
1
1
2
Retaining ring E4
S06