Drop Assy. Attachment - Brother NX600 Service Manual

Modules
3

Drop assy. attachment

1. Attach the drop assy. 1 using the screws 1 (two).
Start movie clip (CD-ROM version only)
1
4
Bushing supporter assy. assembly
1. Attach the lower shaft bushing 1 and bushing presser B 2 to the bushing
supporter assy. 3 using the screws 1 (three).
2. Lubricate the lower shaft bushing 1 with 1 – 2 drops of turbine oil #100.
Lubricate the lower shaft bushing round surface with
turbine oil #100.
Start movie clip (CD-ROM version only)
1
5
Feed adjuster assembly
1. Apply a small amount of Epnoc Grease AP to the F gear 1.
2. Align the F gear 1 and the feed adjuster assy. 2 and attach
Apply Epnoc Grease AP to the entire operating surface
of the feed adjuster assy. F gear
Start movie clip (CD-ROM version only)
S13
3 - 62
Feed module
Screw, Bind
M4X5
Color; Silver
Screw, Bind
M4X5
Color; Silver
15.1
5
Torque
1.18 – 1.57 N·m
1 – 2 drops
Torque
0.78 – 1.18 N·m
.
S13
Small amount
SPRING
XC2530***
1
1
2 3 1
S9
S13
2 1