Feed Adjuster Assembly Removal - Brother NX600 Service Manual

Modules
18

Feed adjuster assembly removal

1. Remove the screws 1 (two), and remove the bushing supporter assy. 1,
feed adjuster assembly 2,
Start movie clip (CD-ROM version only)
19
Feed adjuster assembly disassembly
1. Remove , and detach the F gear 1.
S13
20
Bushing presser B removal
1. Remove the screws 1 (three), and remove bushing presser B 1 and the
lower shaft bushing 2.
2 - 50
Feed and bobbin module
and polyester slider.
S14
2 1
1
2 1
S14
S13
1 2
1
1