Table of Contents
Advertisement
GFK-2436M
Status LEDs
LED
Link LED
Activity
Status
Figure 2: Status LED Location
Installation
Power to the VersaMax Micro PLC must be turned off when installing or removing Option Modules.
1. Remove the two doors shown in Figure 3 by pressing downward on the latches and lifting them
away from the module.
Figure 3: Door Removal
Press Down
Latch and
Remove These
Two Doors
Color
Amber, On
Green, Flashing
Off
Red, On
Red, Blinking (2x/sec)
Description
Connection to Micro PLC established and network is connected
When there is any activity on the network
No errors
Duplicate IP address present or network controller error
No DHCP response or Setup menu active
June 2023
4
Advertisement
Table of Contents
