Technical Support Checks; Disposal - Parker 590+ DRV Product Manual

Disposal

This product contains materials which are consignable waste under the Special Waste Regulations 1996 which complies with the EC Hazardous Waste
Directive - Directive 91/689/EEC.
We recommend you dispose of the appropriate materials in accordance with the valid environmental control laws. The following table shows which
materials can be recycled and which have to be disposed of in a special way.
Material
metal
plastics material
printed circuit board
The printed circuit board should be disposed of in one of two ways:
1. High temperature incineration (minimum temperature 1200°C) by an incinerator authorised under parts A or B of the Environmental Protection Act
2. Disposal in an engineered land fill site that is licensed to take aluminium electrolytic capacitors. Do not dispose of in a land fill site set aside for
domestic waste.
Packaging
During transport our products are protected by suitable packaging. This is entirely environmentally compatible and should be taken for central disposal
as secondary raw material.

Technical Support Checks

The results of the following checks will be very useful to Parker SSD Drives' Technical Support.
Miscellaneous Checks
Check 24V present at Terminals C1 to C9 (C1 is 0V) - dc
Check ±10V present at Terminals B3 and B4 (B1 is 0V) - dc
Check auxiliary supply present at Neutral & Line, 110/240V ac
Check the fans rotate, where applicable
DC590+ DRV Series DC Digital Drive
Recycle Disposal
yes no
yes no
no yes
Caution
Please only attempt these checks if you are electrically competent.
Routine Maintenance and Repair
or
8-3