Profiled Gain - Parker 590+ DRV Product Manual

PROFILED GAIN

This function block may be used to profile the proportional gain input to the PID block.
PROFILED GAIN
Parameter
PROP. GAIN
The nominal gain prior to profiling.
MIN PROFILE GAIN
This expresses the minimum gain required at minimum diameter (core) as a percentage of the (maximum) P gain at full diameter (100%), when
MODE > 0.
DIAMETER
The actual measured diameter. If appropriate, this may be connected to the DIAMETER output parameter in the DIAMETER CALC function block.
MIN DIAMETER
Set to the minimum core diameter (normally the empty core diameter) as a percentage of the maximum roll diameter. If appropriate, this may be
connected to the MIN DIAMETER parameter in the DIAMETER CALC function block.
DC590+ DRV Series DC Digital Drive
100.0%
Tag
404
474
709
710
Programming
Range
0.0 to 100.0
0.00 to 100.00 %
0.00 to 100.00 %
0.00 to 100.00 %
D-97