Restoring Saved Settings - Parker 590+ DRV Product Manual

6-24
The Keypad

Restoring Saved Settings

If you are unsure about any changes you have made and you have not yet performed a PARAMETER SAVE, simply switch the Drive off, and power-
up again. The "last saved" parameter settings will be restored.
Copying an Application
Copying an application requires a host computer connection to the Drive's System Port (P3). Information can then be downloaded to the computer
(and uploaded to the Drive).
Refer to Appendix A: "Serial Communications" for further information.
DC590+ DRV Series DC Digital Drive