Other Important Parameters - Parker 590+ DRV Product Manual

4-16
Calibration and Start-Up

Other Important Parameters

Other parameters, for example ramp rates, may be important for the process. Different ramp rates are available for various conditions:
Condition
Speed Setpoint Change
Jog Acceleration/Deceleration
Controlled Stop Deceleration
Fast Stop Deceleration
Electronic MOP Control
Appendix D: "Programming" fully discusses the functionality and scaling of all drive parameters.
Recording Parameters
It is important to have a backup copy of your drive parameters. This copy might consist of writing down the information on a chart, saving the
parameters to a computer disk, or printing the parameters using an external computer.
To save the parameters as either a hexadecimal ASCII file or as a text file ready for printing, connect a computer to the P3 serial port. Use a
telecommunications program, such as Windows Terminal™, or other terminal emulation programs. Refer to "Using Microsoft® Windows™ to
Document and Clone 590 DRV Digital Drives"for detailed instructions using Windows Terminal™ for uploading and downloading drive parameters.
Refer to Appendix A : "Serial Communications" for general information on using the P3 port to upload and download drive parameters.
DSELite is available from http://www.ssddrives.com/usa/doc/Main%20Software.php. This software allows you to easily configure, download, and
upload the drive parameters using a computer.
Parameter Name
RAMP ACCEL TIME and RAMP DECEL TIME
RAMP RATE
STOP TIME
PROGRAM STOP TIME
INCREASE RATE and DECREASE RATE
Menu
RAMPS
JOG/SLACK
STOP RATES
STOP RATES
RAISE/LOWER
DC590+ DRV Series DC Digital Drive