System Port (P3) - Parker 590+ DRV Product Manual

System Port (P3)

This port has several uses:
UDP Support
DSELite
5703 Support
EI ASCII
EI BINARY
Drive Connections
The port is an un-isolated RS232, 9600 Baud (default), supporting the standard EI BISYNCH ASCII communications protocol. Contact Parker SSD
Drives for further information.
Use a standard P3 lead to connect to the Drive.
P3 Port Pin
1
2
3
4
6-Way Lead to DB9/DB25 Connector
IMPORTANT
P3 Port Pin
1
2
3
4
DC590+ DRV Series DC Digital Drive
Upload information from a PC
Parameters can be monitored and updated by DSELite (or other suitable PC programming tool)
Connection for a Parker SSD Dries' 5703 Setpoint Repeater Unit
Communications with other control/supervisory equipment
Communications with other control/supervisory equipment
Lead Signal
Black 0V
Red 24V
Green TX
Yellow RX
There is 24V present on pin 2 of the P3 port. This may damage your PC or the Drive.
Lead Female DB9 Pin
Black 5
Red not connected
Green 2
Yellow 3
PORT
1 2 3 4
Female DB25 Pin
7
not connected
3
2
A-1
Serial Communications
Refer to page A-2
Refer to page A-5
Refer to page A-6
Refer to page A-9
Refer to page A-14