How To Save, Restore And Copy Your Settings - Parker 590+ DRV Product Manual

How to Save, Restore and Copy your Settings

Saving Your Application
Operating Mode (CONFIGURE ENABLE = DISABLED)
In Operating mode you can change parameter values. The Drive can be running or
stopped. Note that some parameters can only be changed when the Drive is stopped. It is
not possible to modify the internal links when the Drive is in Operating mode.
Configuration Mode (CONFIGURE ENABLE = ENABLED)
In the configuration mode you can modify connections between the function blocks in the
drive. You can also change parameter values, as above. The Drive cannot run in this
mode. Output values are not updated.
DC590+ DRV Series DC Digital Drive
The Keypad
The PARAMETER SAVE menu,
available in both the full and reduced
view levels, is used to save any changes
you make to the MMI settings.
Pressing the (UP) key, as instructed,
saves all parameter values (with one
exception, see the note below) in non-
volatile memory, i.e. values are stored
during power-down.
NOTE
The local setpoint parameter value is not
saved on power-down.
6-23