Keypad Leds - Parker 590+ DRV Product Manual

6-4
The Keypad

Keypad LEDs

There are seven LEDs that indicate the status of the Drive. Each LED is considered to operate in three different ways:
The LEDs are labelled HEALTH, RUN, STOP, FWD, REV, and LOCAL (as SEQ and REF). Combinations of these LEDs have
the following meanings:
HEALTH (OK)
FWD
LOCAL SEQ
RUN STOP
Re-Configuration
Tripped
Stopped
Stopping
Running with zero reference
Running
Autotuning
REV
Requested direction and actual direction are forward
Requested direction and actual direction are reverse
Requested direction is forward but actual direction is reverse
Requested direction is reverse but actual direction is forward
LOCAL REF
Start/Stop (Seq) and Speed Control (Ref) are controlled from the terminals
Start/Stop (Seq) and Speed Control (Ref) are controlled using the Keypad keys
Drive State
Forward / Reverse State
Local / Remote Mode
DC590+ DRV Series DC Digital Drive
OFF
FLASH
ON