Step
OIL FILTER REMOVING
General note
use ORIGINAL-ROTAX®- oil filter only. Only these filters will ensure correct pres-
At every oil change, unscrew the oil filter and cut open using special tool taking care not to
produce chips.
Special tools
To carry out the procedure the following tools are necessary:
12–20–00
Page 28
December 01 2017
MAINTENANCE MANUAL
Procedure
6
Install new oil filter.
7
Pour in approx. 3 l (0.8 gal (US)) of fresh oil.
8
After carrying out the oil change, the engine should be cranked by hand in
the direction of engine rotation (approx. 20 turns) to completely refill the en-
tire oil circuit.
Risk of burns and scalds. Hot engine parts.
Always allow engine to cool down to ambient temperature before starting work.
To ensure correct functioning of the oil circuit and the forced flow lubrication,
BRP-Rotax
m WARNING
ATTENTION
sure in the by-pass valve.
Effectivity: 915 i A Series
Edition 0/Rev. 0