Maintenance Schedule Procedures (Maintenance Check List) - Rotax 915 i A SERIES Maintenance Manual

MAINTENANCE SCHEDULE PROCEDURES
Inspections All stated checks are visual inspections for damage and wear, unless otherwise stated.
Specified period All listed work must be carried out within the specified period.
Maintenance Checks are carried out as per the maintenance check lists, where type and volume of
check lists maintenance work is outlined in key words.
• The lists must be photocopied and filled out for each maintenance check.
Extra inspections • The respective check (e.g. 100 hr. check) must be noted on the top of each page of the
• All the maintenance work carried out must be initialled in the "signature" area by the air-
Maintenance After maintenance, the completed check lists must be entered in the maintenance records.
records The maintenance must be confirmed in the log book.
Discrepancies/re- All discrepancies and remedial action must be recorded in a report of findings to be gener-
medial action ated and maintained by the company authorized to carry out maintenance work. It is the
responsibility of the aircraft operator to store and keep the records.
Replacement of Replacement of equipment (e.g. fuel pump, governor....) and execution of SB (LTA) must
equipment be entered in the engine log book, stating S/N, TSN and date.
Effectivity: 915 i A Series
Edition 0/Rev. 0
MAINTENANCE MANUAL
(MAINTENANCE CHECK LIST)
maintenance check list.
craft mechanic performing the task.
BRP-Rotax
05–20–00
Page 5
December 01 2017