Fuse Unit (Fuse Box) - Rotax 915 i A SERIES Maintenance Manual

Before every installation, the spark plug thread and the spark plug seat at the cylinder
head should be cleaned (e.g. to remove residue of heat conduction compound).
Installation
Heat conduction compound at the ground electrode or the head area can lead to
ignition problems. Apply heat conduction compound sparingly and do not apply
Apply small amount of heat conduction compound to spark plug thread and tighten spark
plug to 16 Nm (142 in. lb) on the cold engine.

FUSE UNIT (FUSE BOX)

General note Check plug connections and fuse plugs.
Effectivity: 915 i A Series
Edition 0/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL
Always replace both spark plugs of a cylinder and do not interchange spark
ATTENTION
plugs between cylinders.
ATTENTION
to the first three threads.
12–20–00
Page 43
December 01 2017