11.7.1)
11.7.2)
11.7.3)
11.7.4)
11.7.5)
11.7.6)
11.7.7)
Effectivity: 912 Series
AIRCRAFT ENGINES
MAINTENANCE MANUAL II
Motor oil
See relevant Operator's Manual of the engine type 912.
In principle motor oil is used for lubrication of components during
reassembly. except where something different is specified. Use only oils
specified in the "Chart of Lubricants" in order to avoid chemical reaction.
Lithium grease
Is used on all electrical connections, to avoid current loss. After assembly
is complete, apply Lithium grease to the connection as anti-corrosive.
Multi-purpose grease LZ
Generally usable, neutrally coloured multi-purpose grease, water resist-
ant and higly adherent.Usable for temperatures from -35°C to +120°C (-
31°F to 248° F).
Corrosion inhibiting oil Mobil
Corrosion inhibiting oil, unsoluble in water, hydrocarbon basis with addi-
tives. The pour point is below -18° C ( -3° F).
WARNING:
When handling chemicals, respect the generally valid
safety directives.
SILASTIC 743 RTV
Is used for vibration damping of the exhaust system springs. The material
fills the complete inside of the springs.
®
LOCTITE
ANTISEIZE 15378
High-temperature
lubricating and anti-corrosion agent. LOCTITE
ANTISEIZE is always applied on both components mated and warrants for
maintenance-free bearing seats due to the hermetically sealed sliding
surface.
®
LOCTITE
"574 orange"
Is a sealing material used as an alternative to conventional solid gaskets
where a high friction factor and exactly defined distance between parts is
®
required. LOCTITE
sealing compound is a solvent-free liquid gasket
applied to the sealing surfaces. After assembly it cures under hermetical
conditions with metal contact.
Its surface sealing properties are guaranteed for temperature range
between - 55°C and + 200°C (- 67°F to + 390°F).
®
Arma 524
Initial issue, Jan. 01/2002
®
page 26