Rotax 915 i A SERIES Maintenance Manual page 122

Figure 7.6: Locking/Loosen of the crankshaft. TYPICAL
Loosen of the After completion of work/check:
crankshaft
Step
12–20–00
Page 14
December 01 2017
BRP-Rotax
MAINTENANCE MANUAL
Plug screw M8x20
1
3 Crankshaft
Procedure
1 Remove the thread bolt (2) and refit crankshaft plug screw M8x20 (1) along
with a new sealing ring with a torque of 15 Nm (133 in.lb).
Sealing ring
2
4 Thread bolt
Effectivity: 915 i A Series
Edition 0/Rev. 0