Engine Cleaning - Rotax 915 i A SERIES Maintenance Manual

General note
ENVIRONMENTAL NOTE
Do not use flammable liquids or caustic cleaning agents for cleaning the engine.
Cleaning agents Use of a commercially available cold cleaning agent for the engine is recommended.
See
Cleaning
electrical installations and shaft seals. Oxidation of the various components and
N N O O T T E E
Always clean engine in cold state.
The engine must always be cleaned with due care and attention to detail. Repair leaks as
required before cleaning.
After each After each cleaning procedure, dry all electrical components such as
cleaning
• Ignition unit
• Spark plug connector
• Clamp connections etc.
by use of compressed air to prevent leakage current.
Effectivity: 915 i A Series
Edition 0/Rev. 0
MAINTENANCE MANUAL

ENGINE CLEANING

When cleaning the engine, the dissolved residues of fuel, oil and other environ-
ment-contaminating agents are rinsed off.
Collect the residual liquids and dispose of it in an environmentally sound way.
Chapter 05-00-00 section Consumable
Never clean an engine with a high pressure cleaner. This is detrimental to the
Before cleaning, all openings through which cleaning agents and/or dirty water
could enter the engine must be closed off.
Failure to do this may result in engine damage!
BRP-Rotax
ATTENTION
Materials.
ATTENTION
their potential failure may occur.
ATTENTION
12–20–00
Page 3
December 01 2017