End Of Service Life - Siemens NXPLUS C Installation And Operating Instructions Manual

Description
SF gas
6
Recycling
46/172
10

End of service life

NOTE!
The equipment contains the fluorized greenhouse gas SF
with a global warming potential (GWP) of 23 900. SF
released into the atmosphere.
For use and handling of SF

controlgear - Part 4: Handling procedures for sulphur hexafluoride (SF6).
Before recycling the materials, evacuate the SF
use.
The switchgear is an environmentally compatible product.
The components of the switchgear can be recycled in an environmentally compatible way by
dismantling into sorted scrap and residual mixed scrap.
After evacuating the SF
• Galvanized steel (enclosure and operating mechanisms)
• Stainless steel (vessel)
• Copper (conductor bars)
• Silver (contacts)
• Cast-resin based on epoxy resin (bushings)
• Plastic materials (blade housings)
• Silicone rubber
The switchgear can be recycled in ecological manner in compliance with existing legislation.
Auxiliary devices such as short-circuit indicators have to be recycled as electronic scrap.
Batteries have to be recycled professionally.
As delivered by Siemens, the switchgear does not contain hazardous materials as per the
Hazardous Material Regulations applicable in the Federal Republic of Germany. For operation
in other countries, the locally applicable laws and regulations must be followed.
For further information please contact your regional Siemens representative.
Revision 05 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C Wind • 802-9074.9
, IEC 62271-4 has to be observed: High-voltage switchgear and
6
6
gas, the switchgear mainly consists of the following materials:
6
registrated by the Kyoto Protocol
6
has to be reclaimed and must not be
6
gas professionally and prepare it for further