De-Earthing With Three-Position Disconnector - Siemens NXPLUS C Installation And Operating Instructions Manual

Operation
148/172
DANGER!
Danger!
In order to prevent switching operations and accidental de-earthing or de-earthing caused

by unauthorized persons:
Always secure the control gate with a padlock. This also applies to earthing with motor
operating mechanism.
Fit a padlock as follows:

• For manual earthing: Fit the padlock at the control gate in center position.
Earthing switch with motor operating mechanism: Push the control gate upwards and fit
the padlock to interrupt the motor control.
22.5

De-earthing with three-position disconnector

Check the ready-for-service indicator.

Remove the padlock.

To release the switching gate, push the control gate downwards and hold.

Insert the operating lever and move straight to OPEN position.

The switchgear is de-energized.
r
Remove the operating lever. The control gate moves to the center position automatically.

Refit the padlock at desired position.

The locking device of the switching gate can be padlocked in all three switch positions.
r
Revision 05 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C Wind • 802-9074.9