802-9074.9 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C Wind • Revision 05
Align and fasten the top plate on the low-voltage compartment.
Fig. 107: Bolting the top plate tight (example with small low-voltage compartment) - view
from the rear
Stick sealing strap on connecting plates.
Bolt the connecting plates together with the top plates and the angle plates respectively on
the left and on the right.
Fig. 108: Bolting the connecting plates tight (example with small low-voltage compartment) -
view from the rear
M5x30, thread-ridging
M5x16, thread-ridging
Installation
115/172