Siemens NXPLUS C Installation And Operating Instructions Manual page 85

Mounting the voltage
transformer frame
802-9074.9 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C Wind • Revision 05
Remove the nut-and-washer assemblies at the rear fixing points of the voltage transformer

frame.
Set down the voltage transformer frame

aligned to the left. Align the voltage transformer frame in such a way that the threaded
bolts on the vessel roof fit into the drill holes of the frame feet.
Fig. 72: Setting down the voltage transformer frame
Fasten the voltage transformer frame

frame foot.
Fig. 73: Mounting the voltage transformer frame
on the switchgear vessel with the protrusion
using 2 nut-and-washer assemblies M8x20
Installation
per
85/172