Remote End - Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual

• IKEv2 DPD retries
Specify the number of allowed failed attempts after which the IKEv2 connection is
considered disrupted. The setting applies to all IKEv2 connections.
• IKEv2 DPD Retry Interval[s]
Specify the interval at which the failed attempts are sent.
4.7.6.2

Remote End

On this WBM page, you configure the partner (VPN end point).
Description
The page contains the following:
• Remote End Name
Enter the name of the remote station and click "Create" to create a new remote
station.
The table contains the following columns:
• Select
Select the check box in the row to be deleted.
• Name
Shows the name of the partner.
• Remote Mode
Specify the role the remote stations will adopt.
– Roadwarrior
– Standard
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
The reachable remote addresses are entered. The reachable remote subnets are
learned from the partner.
The reachable remote address and the reachable remote subnets are entered
permanently.
Configuring with Web Based Management
4.7 "Security" menu
325